INSTALLATION PROCESS FOR GEYSERS







1 =  Tap

2 =  Inlet of water softener

3 =  outlet of water softener

4 =  Inlet of geysers

5 = Keep always Gate Valve close

Measure & Cut the flexible pipe which is given along with water softener according to geyser and tap distance

Insert two nails or screws into walls [drill or use hammer] as per softener measurement, then connect the flexible pipe from outlet of water softener to tap with connectors which is given along with softener

After that , connect the inlet of water softener to inlet of geyser through flexible pipe with connectors which is given along with softener

Refer the above pic

The installation of softener is done

The water softener is ready for use

Note :- the wrong connection of water softener will cause problem to softener


INSTALLATION PROCESS FOR WASHING MACHINES


1 =  ANGLE COCK

2 =  Inlet of water softener

3 =  Outlet of water softener

4 =  Nipple with connector for washing machine pipe

5 = Keep always Gate Valve close

Measure & Cut the flexible pipe which is given along with water softener according to washing machine and tap {angle cock} distance

Insert two nails or screws into walls [drill or use hammer] as per softener measurement, then connect the flexible pipe from outlet of water softener to tap {angle cock} with connectors
After that , connect the inlet of water softener to washing machine pipe through flexible pipe with connectors and Nipple 



Connector = Nipple = washing machine pipe
Refer the above pic

The installation of softener is done

The water softener is ready for use 


Note :- the wrong connection of water softener will cause problem
Angle cock and Nipple , consumer {user } should provide or pay additional charges to technicians {plumber} if they are installing

The above items are available in general hardware stores


1/2 INCHES

WASHING MACHINE QUICK CONNECTOR 1/2 INCH